Hardwood floors can be costly to refinish, but there are many ways to lower the cost. Be sure to consider the length of the project, what hardwoods you can use and safety concerns. Here are some tips for getting started on your project. Keep reading for more details. You can ask a contractor for a quote if you have further questions. You can ask them for advice, too. Continue reading to learn more about this important undertaking.
Cost of refinishing hardwood flooring
The cost of refinishing hardwood floors varies depending on the area of the home and the scope of the project. Refinishing hardwood floors over a larger area can be more expensive than refinishing smaller areas. You will need to use sanding belts and drum sanders. Based on the area being refinished, a lower or higher amount of stain/topcoat may be applied. The materials cost is usually included in the initial quote.
Refinishing hardwood floors can make your home look better and help you save money. It involves sanding the floors, applying color treatments and sealing with a topcoat. Refinishing hardwood floors is much less expensive than installing new hardwood floors. Refinishing hardwood floors is a process that involves sanding the surface of the floor to remove imperfections, and then reapplying the top coat finish. The end result is practically new flooring.
Time frame
There are many options for colors and finishes when refinishing hardwood floor. Most hardwood floors can be finished using either oil-based polyurethanes or water. It takes skill and attention to detail when refinishing hardwood floors. Two to three coats can be applied to finish the floor. Whether you decide to use a stain-based or a water-based product is entirely up to you.
The length of a hardwood flooring refinishing project will vary depending on the type of wood used and the color of the stain. Consider whether or not your wood has been treated using moisture. Sanding can become more difficult if the wood has been damaged by moisture. This can cause sanding to take longer. To flatten the wood, the sanding must take place at 45 degrees rather than following the grain. You should plan on having a large workforce to complete the project.
Prefinished vs. unfinished hardwoods
Prefinished and unfinished hardwood floors are vastly different. The most important difference is the finish. Factory applied finishes are more durable and beautiful than unfinished hardwood and lasts longer. Prefinished hardwood has more layers of protective coating than unfinished. Prefinished hardwood floors can be protected with ScotchGuard and scratch-resist protection. Prefinished hardwood is available in many colors and textures with various levels of durability.
Prefinished hardwood will be more costly than unfinished wood but can easily match existing flooring. Unfinished hardwood is more customizable. It is possible to stain, finish and even add borders or inlays. Unfinished wood can be stained and urethaned to create a uniform look. However, you'll need to invest in tools such as rollers and brushes to apply the finish.
Refinishing hardwood floors poses safety concerns
Hardwood floors can be messy and time-consuming. However, it is also very dangerous. It begins with the removal of old flooring. It is possible that your old vinyl flooring contains asbestos. To safely remove it, hire a professional. New hardwood floors often come with projecting nails and carpet taps. It is essential to have thick-soled boots for work and gloves if you intend to refinish your floors by yourself.
Volatile organic compounds (VOCs) can also be present in hardwood floors that are being refinished. VOCs, which are chemicals that can cause skin irritation or inhalation problems, are harmful to your health. It is essential to use varnish that has been specifically designed for this purpose. It is possible to keep your home and belongings safe with a varnish made for refinishing. Toxic chemicals are explosive and highly flammable. This makes them dangerous to use for refinishing floors.
FAQ
What license do I need to become a handyman in order to get my permit?
To become an independent contractor in most states, you don't need to have a license (as opposed with a salaried worker). However, you still must meet certain requirements:
-
You must be at least 18 years.
-
You should have a high school diploma, or a GED.
-
A four-week course in a vocational school.
-
Check your background through the Department of Licensing.
-
Pay a $20 fee to register annually.
You will also need a workers' comp insurance and a business license.
Can a handyman install new appliances or fixtures?
These kinds of projects can be handled by a handyman. Make sure you know exactly what appliance or fixture you need to be installed beforehand.
What happens to me if a handyman causes damages and I am unhappy with his work.
Notify your contractor immediately if there is a problem with the project. It's best to write down exactly what happened and include photos of the problem area. Next, contact your insurance company and file for a claim.
Statistics
- Our handyman services for seniors are provided by professional senior helpers who have been serving the community for over 20 years with 98% customer satisfaction. (cantatahomeservices.org)
- According to the U.S. Bureau of Labor Statistics, in May 2020, there are 1,357,630 handymen employed in the U.S.. (angi.com)
- More than 20% of homes in America have outdoor living spaces, including decks and patios. (mrhandyman.com)
- An estimate was that in 2003, the market for home maintenance and repair spending was up 14% 2001 to 2003. (en.wikipedia.org)
- Mila keeps a commission of 20% for each completed service performed by Friends and charges various service fees regarding work done by Pros. (appjobs.com)
External Links
How To
How to replace a damaged tile
Step 1 – Remove the tiles.
Remove the old tiles from your flooring and put them aside. These tiles will be useful later on, so you'll need to keep them intact. To avoid any problems with replacements, take note of the pieces that have been damaged or lost.
Step 2 - Select New Tiles
Check out these options for tile replacement.
-
Locate a replacement tile that is the same as the one you just removed.
-
Use the measurements you took when removing the tile to find a matching piece. This makes it easier to get the right size without having to measure again.
-
Look for various colors, patterns, textures, sizes, shapes, etc.
-
Consider the grout you want to use. Some prefer a solid color, while others like mixing it up.
-
Choose a tile that resists moisture.
-
Consider the location of your tile. You can save both time and money by making sure that there is enough room for proper installation.
-
Once you've found the tile that suits your needs, you can place your order online.
Step 3 Install the new tiles.
Install your tiles using the same method you used before. Make sure they are aligned correctly so that they fit together perfectly.
Step 4 – Clean up
Be sure to vacuum up all crumbs and debris before applying the last layer.
This will keep dust and dirt from getting into the grout between tiles, which could lead to mold.
Step 5: Sand down the Floor
Clean everything and sand the floor.
Step 6 -- Finish Off
After the floor has been smoothed, you can apply protective coatings to the tiles. Because wet paint can cause damage to the tiles' surfaces, it is important that you wait.
For stain protection, you can always use a product called "damp&dry" to clean your floors.
It won't solve every problem after your tiles are installed. An anti-slip coating can be added to the protective layer for children who are often running around.
Remember to let the protective sealer remain on for several additional weeks before you move into your home.